Will my devices work?

Terra AC Wallbox

Where to set it: ABB TerraConfig app

On firmware 1.8.21 or older, disable automatic measurand detection.source

Eve Single Pro-line

Where to set it: Alfen ACE Service Installer

source

Eve Single S-line

Where to set it: Alfen ACE Service Installer

source

MaxiCharger AC Elite Home / AC Lite

Where to set it: Autel Config app → OCPP

source

Aura / Halo

Where to set it: Charge Amps portál

source

Chargestorm Connected 2

Where to set it: Webes felület

source

AC MAX

Where to set it: Delta app / kézikönyv

source

Caro Series Home Wallbox

Where to set it: A töltő hozzáférési pontja: 192.168.4.1

Firmware older than 1.0.25.130 needs a vendor update.source

INCH Pro

Where to set it: Webes felület

Authorization: "Central system only".source

Elvi

Discontinued; existing units work with third-party servers.source

A-series (A022KP1)

Where to set it: FoxESS app

Works well on 1.6J, not on 2.0.1.source

Wattpilot Go / Home

Where to set it: Solar.wattpilot app

Needs Wi-Fi.source

Entity Pro

Where to set it: Webes felület

source

Charger Gemini / Gemini 2.0 / Gemini flex

Where to set it: go-e app → Beállítások → Kapcsolat → OCPP

Needs firmware 055.0 or newer.source

Charger PRO

Where to set it: go-e app → OCPP

source

THOR 11AS / 22AS

Where to set it: ShinePhone app, OCPP szervercím

After changing the server, the ShinePhone app no longer manages it.source

FusionCharge AC (SCharger-7KS-S0 / 22KT-S0)

Where to set it: FusionSolar app (új firmware)

Needs recent firmware, enabled in FusionSolar.source

KeContact P40

Where to set it: Webes felület

source

AMTRON 4You 500 / Charge Control / Professional

Where to set it: Webes felület (micro USB)

The 4You 300 and 200 have no OCPP.source

EVlink Pro AC

Where to set it: eSetup app vagy ECCT: Supervision URL

source

Schneider Charge

Where to set it: eSetup app, OCPP szervercím

Runs on OCPP in our own test home.source

Universal Wall Connector

Where to set it: Tesla app → OCPP szervercím

Third-party access can be unreliable.source

Trydan

Where to set it: V2C app

source

EVC04-AC22SW

Where to set it: Webes felület

source

Copper SB

Where to set it: myWallbox app → OCPP

source

Pulsar Max

Where to set it: myWallbox app → OCPP

source

Pulsar Plus

Where to set it: myWallbox app → OCPP

Leave the password field empty.source

Go / Go 2

Where to set it: Zaptec Portal → OCPP

Direct OCPP needs a firmware update.source

Home / Charge / Charge Up

Where to set it: Easee felhő (felhőből felhőbe)

Smart charging has caveats.source

Pro

Where to set it: Zaptec Portal

Zaptec's cloud connects to us.source

zappi

Where to set it: myenergi myaccount

No smart charging profiles, current cannot be set. Sources disagree.source

AC EV Charger

Where to set it: A gyártónál kell kérni

Defaults to Sigen Cloud.source

eMH1

Newer ABL Pulsar and eM4 models support OCPP 1.6.source

Wall Connector Gen 3

Cannot be steered. The water heater part still works.source

Charger Pro / Connect

No reliable OCPP source found.

witty

The older model only worked with the vendor app.source

Wallbox Energy Control

No reliable OCPP source found.

KeContact P30 (c- és x-series)

Where to set it: DIP kapcsolók és webes felület

Sources disagree (1.5 or 1.6J). The b-series has no OCPP.source

Enector

No reliable OCPP source found.

EV Charger 7,4 / 22

No reliable OCPP source found.

Next

Where to set it: A beállító app 2026 januárjában megszűnt

Now trades as Ampure; the old setup app is gone.source

3EM-63 Gen3

Where to set it: Beállítások → Outbound WebSocket

Gen3, 63 A clamps.source

EM Gen3

Where to set it: Beállítások → Outbound WebSocket

Single-phase homes, or as a production meter on the inverter cable (Gen3).source

Pro 3EM (120 A)

Where to set it: Beállítások → Outbound WebSocket

Recommended. DIN rail, LAN or Wi-Fi.source

Pro 3EM-3CT63

Where to set it: Beállítások → Outbound WebSocket

Smaller 63 A clamps.source

Pro 3EM-400

Where to set it: Beállítások → Outbound WebSocket

For large supplies.source

Pro EM-50

Where to set it: Beállítások → Outbound WebSocket

For single-phase homes, or as a production meter on the inverter cable.source

SMA Home Manager, Huawei DTSU666, Fronius Smart Meter, Eastron SDM és társaik

Inverter meters cannot connect to us. Add a Shelly meter.source

3EM (első generáció, Gen1)

The old Gen1 Shelly 3EM cannot connect out. Replace with a Pro 3EM.source

EM (első generáció, Gen1)

Gen1 device, cannot connect out.source

1 Gen3 / 1PM Gen3

Where to set it: Beállítások → Outbound WebSocket

Not DIN rail; needs a box.source

Plug S Gen3 (okos dugalj)

Where to set it: Beállítások → Outbound WebSocket

For a plug-in water heater, no electrician needed. Wall socket only, no extension lead.source

Plus 1 / Plus 1PM

Where to set it: Beállítások → Outbound WebSocket

Not DIN rail; needs a box.source

Plus Plug S (okos dugalj)

Where to set it: Beállítások → Outbound WebSocket

For a plug-in water heater, no electrician needed. Wall socket only, no extension lead.source

Pro 1

Where to set it: Beállítások → Outbound WebSocket

Works, but meters nothing: the dashboard only shows on/off. DIN rail.source

Pro 1PM

Where to set it: Beállítások → Outbound WebSocket

Recommended: also meters the heater, so the dashboard shows how much of it came from the sun.source

Sonoff, IoTec, Tuya és más okosrelék, okosdugaljak

Cannot connect directly. A Home Assistant route is planned.source

1 / 1PM (első generáció, Gen1)

Gen1 device, cannot connect out.source

Plug S (első generáció, Gen1)

Gen1 device, cannot connect out. Its successor is the Plus Plug S.source

Bármely inverter, Shelly termelésmérővel

Where to set it: Shelly EM Gen3 vagy Pro EM-50 (1 fázis), Pro 3EM (3 fázis) az inverter kimenő kábelén

Recommended: shows production live, whatever the brand. Not needed for the diversion, only for the display.source

SUN (Solarman)

Where to set it: Fejlesztői hozzáférés e-mailben kérhető

Slow approval. Until then: a Shelly production meter.source

Primo, Symo, GEN24

The Solar.web API is for business partners and paid; the local Solar API is only reachable from the home network. Until then: a Shelly production meter.source

SEMS Portal

Where to set it: Titoktartási szerződés után engedélyezik

Until then: a Shelly production meter.source

MIN, MOD, SPH

Where to set it: A tulajdonos maga kér tokent: ShinePhone app → Me → API Token

Until then: a Shelly production meter.source

SUN2000 (FusionSolar)

Where to set it: A telepítő kér hozzáférést a FusionSolarban

A separately requested API account and strict call limits. Until then: a Shelly production meter.source

Sunny Boy, Sunny Tripower

The SMA cloud is reached through its partner programme; the local link only works from the home network. Until then: a Shelly production meter.source

Home Wave, HD-Wave

Where to set it: A tulajdonos maga kér kulcsot: portál → Admin → API Access

300 calls a day, so only quarter-hourly updates. Until then: a Shelly production meter.source

S5, S6

Where to set it: SolisCloud → API Management (néha ügyfélszolgálati jegy kell)

Until then: a Shelly production meter.source

SG, SH (iSolarCloud)

Where to set it: Fejlesztői alkalmazás, jóváhagyással

Until then: a Shelly production meter.source